Hi All,I would like to upgrade cisco 3560 from 15.0(2)SE2 to the latest 15.0(2)SE11. Kindly advise any interm upgrade isrequired. Switch Ports Model SW Version SW Image------ ----- ----- ---------- ----------* 1 28 WS-C3560G-24T...
Dear Sir,In my ASA i am getting the message is like thisDeny IP spoof from (127.0.0.119) to 108.122.0.0 on interface MZ-ACCOfter that i enable IP VERIFY REVERSE-PATH command on the MZ-ACC interface ofter enabling i showing the below msg106021 127....
Dear Sir,iam facing strage problem is we have site to site tunnel established phase 1 is comleeted but there is no traffic on responder side and when i debug ipsec iam getting the fallowing eoor[IKEv1 DEBUG]: Pitcher: received a key acquire message, ...
Dear All,I have two cisco 3845 routers which we plan for active standby purpose.Now one ISP terminated on one router and working fine now we are planning for second ISP for standby.Now i want to achive if one ISP fails second ISP should work . Now we...
Dear All,We have cisco 4510R-E switch having sup6-E in that we have CVR-X2-SFP twingig convertor module and we have cisco SFP-4G-SW module.This module is compatable with this CVR-X2-SFP module or which module is compatablr with CVR-X2-SFP.I require 1...
Hi Minkdennis,Thanks for your reply and presently only one isp is connected and its a RJ-45 one wan ip,one lan ip and default route thats all.please share best idea plz.Thanks & RegardsSrinivad
Hi Varun,Thanks for replyiam configuring SNMP on my serverload balancer and my SLB v-lan is 400 and igiven virtual interface ip 10.242.105.1 on my ASA.In my asa my snmp server is 10.242.103.42 now iam unable to ping from my snmp server to ace virtual...
Dear sir,Thanks for ur great on time support and iam very greatfull to u.I tried ur config its working fine,Thanks for netfourms and great support from u.Thanks&Regardssrini
