Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,We have an existing WLC 5508 at our Central Office location catering to Lighweigh AP in Branch Offices over MPLS.We have recently bought new Cisco 4507R+E switch which will also be installed at Central Office location with WS-UA-SUP8E (Wireless...
Hello,We recently had one of our ASR1001 router getting reoladed automatically. The show version command output shows the last reload reason as LocalSoft.Uptime for this control processor is 2 hours, 31 minutesSystem returned to ROM by reload at 10:1...
Hello,We are facing High CPU usage on one of our Cisco WS-C4503 switch. Below are the details of troubleshooting done so far.CPU is high since last 4 days continuosly at around 80%.No configuration changes done on this switch since last 2 months.'sho...
Hello,This is reagrding one of our switch in production - Cisco 3560G. IOS image running is c3560-ipbase-mz.122-25.SEE2/c3560-ipbase-mz.122-25.SEE2.binBelow is detailed issues & observations:1) Telnet/Console Access is extremely Slow.2) Although no t...
Hello,We need help to troubleshoot high CPU on Cisco 4948E switch. IOS image is cat4500e-lanbase-mz.122-54.SG1.binTried finding the root cause using Cisco documentation for High CPU on 4948 switches but unable to find anythin specific.Below is the ou...
Hello,I am not able to access the link provided by you.Also, I have already tried troubleshooting this using the Cisco document for high cpu usage on 4500 series switches.As already mentioned earlier, as per that document the hig cpu is realted to A...
Hello Ray,Try to create SVI for VLAN 1 on your switch as well. Then try to ping it from your machine & Firewall. This will confirm if the issue is between the machine & switch or between switch & firewall.Once done, please share the port configurati...
Hello Ray,Ping is not enabled by default on Cisco ASA. Can you try to ping the machine IP from ASA instead.If that is successful, it means there is no communication issue between the firewall & switch. You would then need to allow ping on your ASA.L...
Hello Leo,We have several other similar switches running the same IOS without any issues. Also, this switch was also running well since past several years as well, so this does not looks to be related to IOS image.The only thing which we can think o...
