Hello, Not sure if I got your requirements correctly. The SDWAN edge router can function as normal router if you wish to. As long as you don’t enable transport on the interface, you can use that interface as normal router. If you want extend overlay ...
Hello, I assume you removed some sensitive information in the config; It should work as long as it's the cloud init config generated from vManage. One possible reason I can think of is the chassis number that you use to generate cloud init config fil...
It can be automated, If you generate and download the cloud init configuration which will include the SN and token. For cloud service provider, when you provision c8kv, this cloud-init config can be entered from custom data. You need find the equival...
You might be missing the hsec license, which is required to get over 250M throughput. Follow the below steps(online or offline) to active hsec licensehttps://www.cisco.com/c/en/us/support/docs/routers/xe-sd-wan-routers/218142-configure-hseck9-license...
Hello,That's two different vendor solution. Viptela SDWAN solution has integrated security functions, such as IDS/IPS/NGFW/URLF. You might not need a separate firewall solution depending on your use case.HTH,Lei Tian