About John Joseph

John Joseph · 02-22-2016

Hi Cisco Support Community, As a church we have found the UC560 system a good fit for our needs. There is one piece we are working on finding a solution to. During our services over the weekend, it would be nice for all the phones to be "on" rathe...

John Joseph · 05-02-2014

Good Afternoon Friends,We are setting up a new site-to-site configuration for our small business. Our main office utilizes the UC560 and a new remote location uses an old WRVS4400 (we found it in the closet). We have successfully connected the Sit...

John Joseph · 03-12-2014

We have several directors and assistants on staff where it would be helpful to the assistant if their phone displayed and differentiated between off hook or dnd. Currently, both off hook status and dnd report the same indicator for the assistant. U...

End User GUI · 06-30-2013

We've just rolled out a UC560 with several SPA514 and 7965 IP phones. Our goal is to provide users with more access to their phone configuration. Is it possible that we set up our end users with a GUI to configure their speed dial buttons and speed...

John Joseph · 06-09-2013

Dear Cisco UC Community,What are the ramifications if a company installs and configures a UC560 using command line configuration, and we would like to manage the telephone system using CCA 3.0? Can we use CCA 3.0 after the fact to make modifications...

John Joseph · 04-20-2016

BJ, Thanks for offering to help. We use 7965 and 514G phones. Yes, we know they are on all the time and should never turn off, but rather the display turns off as an energy saving feature. What we were trying to accomplish is to have adjust the sl...

John Joseph · 05-25-2014

Samir,You are basically right. The WRVS4400 does not support two different subnets. However, there are other devices that do. Here are two different devices that will work:800 models, for small branches:http://www.cisco.com/c/en/us/products/router...

John Joseph · 05-10-2014

Samir,Thank you for the reply. Actually, I think we can have up to 5 tunnels on the WRVS4400N. I've attached a screen shot for you to see.

Re: End User GUI · 07-02-2013

I meant to attach a picture...to help with the explanation.

Re: End User GUI · 07-02-2013

Alexander,Thank you for the help. Yes, I was able to log into the GUI for the user to configure the phone. I think because the system was originally set up using CLI, there are very few options to modify. The only changes that can be made are addi...

Member Since	‎10-18-2010 12:42 AM
Date Last Visited	‎08-18-2017 04:03 AM
Posts	18

User Statistics

User Activity

Schedule IP Phones to Turn On

WRVS4400 Site-to-Site VPN

Differentiate between DND and "Off Hook" status

End User GUI

UC560 & CCA 3.0

BJ,

Samir,You are basically right

Samir,Thank you for the reply

Re: End User GUI

Re: End User GUI