About junsung kim

junsung kim · 08-24-2020

hi everyone A routing flow is asymmetric.A icmp request comes in another route.Then icmp reply goes to ASA.ASA forwards the packets from inside to inside by static routeI've used to tcp_state_bypass feature to clear this issue.But icmp isn't successf...

junsung kim · 04-18-2020

Hi everyone.If I set DNS value 8.8.8.8 in the group policyA DNS query goes to a tunnel.I hope that the DNS query goes to the internet directly.But I don't know how to do it. thank you in advancebest regards

junsung kim · 02-05-2020

Hi I have 1G link.I want to assign max 400M for traffic going to DMZBut, if the 200M of DMZ traffic is used, other general traffic should be able to use 800M.And, if 700M of DMZ traffic comes in, 300M of DMZ traffic must be dropped.How should i confi...

junsung kim · 01-24-2020

Hi everyone 1. When apex/plus anyconnect licenses are added, should I install activation-key again or not?2. After purchasing 50 licenses if i purchases 25 licenses again in 3months, is it correct that 75 licenses are available during 9 months? tha...

junsung kim · 11-21-2019

Hi, everyone I want to show "show clock" on the screen when i enter show command using EEM script.but i don't know how to do itcould you give me a guide? thank youbest regards

junsung kim · 08-24-2020

Hi this is by design.i'm going to suggest topology change.But i want to know how i can fix it without topology change. thank youbest regards

junsung kim · 11-21-2019

Hi balaji, For example, when i input "show ip int brief" command, before the result is shown,the result of "show clock" should be shown first or at the end.So, i want to see when i input every show command thank you for your kindness

Member Since	‎08-13-2012 06:34 AM
Date Last Visited	‎01-03-2021 09:00 AM
Posts	7

User Statistics

User Activity

echo reply Drop-reason: (inspect-icmp-seq-num-not-matched) ICMP Inspect seq num not matched

anyconnect with google dns

Q, 400M policing

question about anyconnect license(adding, stacking)

show clock with EEM

Re: echo reply Drop-reason: (inspect-icmp-seq-num-not-matched) ICMP Inspect seq num not matched

Re: show clock with EEM