mhiyoshi
Level 3
Level 3
Member since ‎01-27-2005
‎03-27-2024

User Statistics

  • 230 Posts
  • 1 Solutions
  • 134 Helpful votes Given
  • 21 Helpful votes Received

User Activity

Dear all, It is pretty curious if it configures below and after ping Nexus9K creates AM route. I appreciate if there is any speficiation or tips.       interface Ethernet1/3 medium p2p ip unnumbered loopback0 ip ospf network point-to-point ip...
Dear all, I have two questions about invalid-spi-recovery mechanism below. 1. According to the following URL, in my understanding "crypto isakmp invalid-spi-recovery" command is just a work arround because this command itself does not resolve the inv...
Dear all, According to the folloiwng output, I think Catalyst8500's CDP is disabled on interface level by default right?     Cat85(config)#cdp run Cat85(config)#end Cat85#sh cdp interface gigabitEthernet 0/0/0 CDP is not enabled on interface Gigabit...
Dear all, I think Catalyst9K can check the etherchannel LB Dest Port with show command however ASR1K can also configure routed etherchannel but how to check with show command? [Cisco ASR 1000 Series Aggregation Services Routers Software Configuration...
Dear all, Currently I have been investigating FEC recommendation for Catalyst9600 and Nexus9000. The following links are related URL. [Understanding FEC and Its Implementation in Cisco Optics]https://www.cisco.com/c/en/us/products/collateral/interfac...
Community Statistics
Member Since ‎01-27-2005 03:03 AM
Date Last Visited ‎03-27-2024 12:16 AM
Posts 230
Total Helpful Votes Received 21
Helpful Votes From