Hello,I want to configure two vlans with a separate subnet each on a RV042G vlan 1: 192.168.1.0/24vlan 2: 192.168.2.0/24Can you help me to this?What I did is configuring port 1 for VLAN1 and port 2 for vlan 2... also configured two subnets, bot all p...
Hello,I'm having a lot of throubles with my SPA9000, SPA400 setup.I'm in Mexico with 4 Axtel PSTNs, my calls became to cross. spa9000 and phones restarts, no AA answering, one way audio... every problem is happening.
I have the same problem... And then it keeps logging some type of mismatch between connections.2013-07-25 13:50:18: [rv120w][IKE] WARNING: Remote address mismatched. Local=XXX.XXX.XXX.XXX[4500], Peer=XXX.XXX.XXX.XXX[500]
I have this problem too...Is there a way so that DynDNS updates to real IP address instead of NAT?I used to have this same problem even with Windows dyndns client... so I changed to No-IP but this RV Routers don't support No-IP.No-IP acts itself as a...
I think deleting is not possible...What I do, for this is to replace/overwrite the file FWSM# copy tftp://ipaddress/asdm_file disk:/asdmand for image FWSM# copy tftp://ipaddress/image_file disk:/imageGreetings!
