About hardiklodhia

hardiklodhia · 06-14-2013

Hi,I am trying to find out NAT with route-map support on Cisco Nexus 3548. Has anyone done similar implementation and confirm "route-map" option is available in nexus 3548. Thanks in advance.Rgrds,hardik

hardiklodhia · 08-10-2012

Hi,I am facing this error while machine authenticates agaist AD for wireless users. My requirement is users with corporate laptop get privileged vlan and BYOD should get normal vlan.I am using Cisco ISE 1.1.1 and configured authentication policies to...

hardiklodhia · 02-15-2010

Hello All,Wanted to confirm maximum E1 ports supported on 2811 without any performance degradation.2811 has 4 HWIC slots, i need 8 E1 ports to be connected to different sites.if i populate all 4 slots with VWIC2-2MFT-G703 which makes 8 E1 ports, Any ...

hardiklodhia · 12-29-2009

Hello All,I am looking for Call quality monitoring software for IPCC.Any recommendation????Thanks in advance.

hardiklodhia · 11-25-2009

Hello,I added external authentication for NAC through AD by ldap." authentication against backend Ative Directory"I followed the procedure as per documentation but agents cant login now. CAS version is 4.1.3 and CCA doest show provider other then loc...

hardiklodhia · 04-29-2013

Hi,I am having same issue with ISE 1.1.1 and I have discussed this thing with Cisco (ISE Expert) and he suggested that best practice is to use device certifiacte alone and then upload intermediate root certificate and root certificate to the ISE cert...

hardiklodhia · 08-29-2012

Hi Tarik,Is user connected to the network and can it access the domain controllers after machine authentication succeeds? YES, The assigned VLAN can reach DCs.Also do you have the nac agent installed on this device as well?(Anyconnect with NAM)Are yo...

hardiklodhia · 08-28-2012

Thanks for your help Tarik,I have changed the NAM profile as you suggested but still only one user can login successfully. When I login with diffrent user it still not working. However, ISE authentication logs shows successfull with correct Authz pro...

hardiklodhia · 08-28-2012

Hi Tarik,I have tried using Cisco Anyconnect NAM on Wondows XP for machine and user authentication but EAP-chaining feature is not working as expected. I am facing few challenges. I have configured NAM to use eap-fast for machine and user authenticat...

hardiklodhia · 08-15-2012

Hi Tarik, thanks for your support. I will try Anyconnect and hope We can achive machine and user authentication same time before ISE applies authorisation profile/rules.Thank you.Sent from Cisco Technical Support Android App

Member Since	‎06-04-2006 11:12 PM
Date Last Visited	‎04-19-2024 02:04 AM
Posts	135
Total Helpful Votes Received	49

User Statistics

User Activity

Nexus 3548 NAT capabilities

Machine authentication using certificates

Maximum E1 Cards supported on 2811

Call Quality Monitoring Software

NAC AD authentication problem

ISE Certificate Chain Not Trusted By WLAN Clients

Machine authentication using certificates

Machine authentication using certificates

Re:Machine authentication using certificates

Re:Machine authentication using certificates