High Level Goal: vManage integration with SPLUNK
Goal Description: Customer needs to gather data from Cisco SD-WAN vManage into SPLUNK platform. There are many reasons why vAnalytics is not suitable and final solution. E.g. W...
Hi allwe have problem with booting CUCM 6.1.3.3190-1 ( 6.1(3b)SU1 ). There was a short power outage in computer room. After that CUCM is unable to boot up successfully. Server reports that there is a problem with loading “adpahci.o” module or some i...
Hi guys.I would like to ask for help with following problem. On several CCM (e.g. 5.0.4.2000-1) I have founded strange behavior. I have 3 digits numbering for internal lines. For outgoing calls I am adding prefix in route pattern (Prefix Digits -Outg...
Hi all. Our customer started IP telephony project with ordering 50 user license for CCM5.0 solution bundle A (USOL-A-50U+SW-LIC). It means 50 provisioned phones. How can I get report how many phones are currently provisioned? In "License Unit Report"...
Hi allWe have problems with synchronizing LDAP users from Novell eDirectory to Callmanager 5.04.Tested Configuration:CCM5 - system version: 5.0.4.2000-1, sdministration version: 1.1.0.0-1CCM5 LDAP Settings:System->LDAP System->LDAP Server Type = Nets...
FieldNotice i spoke about might behttp://www.cisco.com/en/US/ts/fn/632/fn63255.htmlBut i have check itOdesláno ze Samsung Mobile"paul@lexnetinc.com" napsal/a:Cisco Support Community<></>Re: CUCM 6.1.3 - boot problem after power outagecreated by paul@...
Hi Paul. There was a issue with BIOS on CUCM server and also known bug. Tommorow I will try to find it and let you know.Regards Miroslavze Samsung Mobile"paul@lexnetinc.com" napsal/a:Cisco Support Community<></>Re: CUCM 6.1.3 - boot problem after pow...
Hi Joao.You are right ... BUT ... original CUCM 7.0(1) apliance is almost same as yours MCS see http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/ps7299/product_data_sheet0900aecd805efb09.htmlAccording to release notes for CUCM7....
