About jonesl1

jonesl1 · 03-16-2015

Hello All,Needing some assistance with an IP SLA setup that I'm having some issues wrapping my head around. I have a router that has two connections to a remote site router. One connection from HQ-Rtr has a serial connection to an MPLS cloud u...

jonesl1 · 01-14-2015

I am looking for some professional opinions on how to go about setting up secure connectivity to multiple remote sites. I figured going to the professional forum is probably the best place to go to see what everyone thinks. Here are the requirements...

jonesl1 · 09-09-2014

I am wanting to apply QOS onto some of our WAN circuits. Here is my scenario. Headquarters end has a 45Mb DS3 to the MPLS cloud. Remote end has a multilink T1 (3Mb) connection to the MPLS cloud. We are doing BGP to the cloud itself. My pro...

jonesl1 · 02-25-2014

I am in the process of trying to implement GETVPN in order to encrypt all sensitive data across the telco provider network. Justto give you a little background, we have approximately 500 1921 routers located at remote agencies. We also have a heade...

jonesl1 · 04-10-2013

Just wondering if someone can help with this. What would cause something like this? It seems my sequencenumbers are all out of whack. I've also been receiving a lot of duplicate packets on other flows. It starts off good, untilit gets to the 6 ...

jonesl1 · 03-17-2015

So ultimately we currently have one of the sites which is having a horrible connection to it's provider via MPLS. We are trying to prevent downtime to this site (and other problem circuits) by implementing a redundant scenario. So our intent is to a...

jonesl1 · 03-17-2015

Well you are correct in your thinking. I do have multiple other sites that would need to communicate back to that remote site. So I don't really want to advertise it from the central side. However, I guess I don't know how to not distribute it...

jonesl1 · 03-16-2015

You ARE AMAZING!!! You are absolutely right. That's exactly what it was. I created a route-map and changed the weight of that single route and sure enough....works GREAT! I do thank you. I guess I obviously won't need that route map nor th...

jonesl1 · 03-16-2015

So how would I go about modifying the routes received from the PE to test that? I guess I'm not familiar with that part. It makes sense what you are explaining though.

jonesl1 · 03-16-2015

And you are correct. When I shutdown loopback on Rtr A, central side MPLS doesn't receive the route and DOES failover to ASA. It just doesn't fail back.

Member Since	‎04-12-2005 07:07 AM
Date Last Visited	‎08-18-2017 04:03 AM
Posts	119

User Statistics

User Activity

IP SLA and BGP

Design and professional opinion

QOS from Central side to Remote end

GETVPN Questions

TCP sequence issue

So ultimately we currently

Well you are correct in your

You ARE AMAZING!!! You are

So how would I go about

And you are correct. When I