About smcquerr

smcquerr · 11-07-2013

This document describes the use of threshold policies within UCSM to monitor they system for bandwidth hot spots. It describes the process for alerting when BW crosses a user defined threshold and provides some insight on other key error statistics ...

smcquerr · 02-04-2014

Muhammad,What version of CIMC are you running? What are the switch types? It is possibly a duplex/speed issue. There are settings for the CIMC speed/duplex with the latest version of CIMC. Try F8 and test different settings to see if this clears ...

smcquerr · 01-28-2014

Dani,Yes this is a supported topology. The one thing to keep in mind is that the Emulex HBA is not part of the UCS fabric and can not be managed by the UCSM service profile. In order to configure the card you would need to use the option ROM and or...

smcquerr · 01-21-2014

Cheng,The most common issue with Discovery is when a rack server server was used for something prior to integration or has some setup on the CIMC. Try connnecting a Keyboard and Mouse to the system and Press F8 to enter the CIMC configuration. Then...

smcquerr · 01-02-2014

Derick,Q1. Yes this card combination is suopported for UCSM integrated servers.Q2. No. The PCIe complex for the LOMs are hidden to the system by the CIMC when in UCSM Integrated mode, even when you are in Single Wire mode.Let me know if you need addi...

smcquerr · 12-11-2013

Hetai,I am working on a Video which should be completed by mid January 2014.Thanks,Steve

Member Since	‎02-16-2006 01:06 PM
Date Last Visited	‎02-08-2021 12:08 AM
Posts	53
Total Helpful Votes Received	73

User Statistics

User Activity

UCS Network Utilization Monitoring Best Practices

My C220M Management port is not working

UCSM C-series integration

how to connect c240 to FI in direct mode

Re:C Series UCSM Integration Design

Re: UCS Network Utilization Monitoring Best Practices