About Athonia Cappelli

Athonia Cappelli · 01-22-2019

HI all, The SSL certificate on our ASA pair has a "common name" like PhoneVPN.myCompany.com in the certificate. That cert expired recently. amazingly this didn't cause the phones to complain yet. I now have a wildcard certificate I'd like to use ...

Athonia Cappelli · 04-28-2016

Symptom: Calls between an MX300 G2 running CE8.1 and several different TX1310 immersive units would not setup. Conference Control Center showed 'Dialing' but no connection took place. Solution: Disabling multi-way on the MX300 G2 allowed calls to bui...

Athonia Cappelli · 10-30-2014

All, Below are errors from a Q931 debug for a Vz PRI circuit. caller ID that we place on the line using is not what goes out to the PSTN. Items that standout are: Cause i = 0x82E46C - Invalid information element contents Cause i = 0x82AB6C - Access ...

Athonia Cappelli · 12-18-2012

Community,We're currently running a c20s codecs (software version 5+) in conference rooms and they're all registered via SIP with our Call Manager 8.6. This works nicely but doesn't facilitate conferencing desktop computers and home users. We acquire...

Athonia Cappelli · 11-27-2012

I have been using the guide at Peter's CCIE Musings and Rants (now in colour!): Cisco ISR G2 Video Conferencing Configuration to setup the video conferencing in our company. It's working in certain offices but not others. our Northern California offi...

Athonia Cappelli · 01-23-2019

Fab. I'll attempt the upgrade today and write back with any details. As it stands now phones are still connecting to the VPN concentrator even though the cert is expired.

Athonia Cappelli · 03-14-2017

HI All, I've installed this OVA onto ESXi 6.5 and there were no errors during the process. I notice two issues.You'll see in the video below that when I enter the CLI there's an error about '/ape/ape/opt/env/ape.env' not existing as reported by /apeb...

Athonia Cappelli · 04-29-2016

I do have a case open and I reported it there as well. In the interest of letting people who might also run into this problem and happen to search the forum (like I did) I wanted to share with the community. Quick update: after further testing we fo...

Athonia Cappelli · 10-31-2014

Thanks for the response. I should have mentioned that this location uses a Callmanager Express (CME). The entire config resides on the router.

Athonia Cappelli · 08-10-2014

In CUCM go to Device --> Phonesearch for the phone you'd like to make Caller ID changes onUnder 'Associated Devices' on the left side of the phone configuration screen, click the directory number.Change the 'External Phone Number Mask' to the number ...

Member Since	‎09-01-2011 11:32 AM
Date Last Visited	‎01-24-2019 04:45 PM
Posts	32
Total Helpful Votes Received	5

User Statistics

User Activity

Ramifications to VPN phone state after converting ASA to wildcard certificate?

Multiway breaks calls between codecs running CE8.1 and TX1310 immersive systems

Outbound caller ID values on ISDN PRI will not take when transmitted to the PSTN

Uses for a Tandberg Movi TTC2-03 with c20 codecs

dedicated 2900 series router and video conferencing between three phones

Re: Ramifications to VPN phone state after converting ASA to wildcard certificate?

Re: Cisco UCS Platform Emulator 3.1(2bPE1)

I do have a case open and I

Thanks for the response. I

In CUCM go to Device -->