I have access to network 10.3.1.0 /24 but I am not able to access 10.3.2.0/24 and other networks behind the Easy VPN server.I am using a software client to connect to the server.I have configured split tunnel to the network 10.3.0.0 /16 and it shows ...
We have a printer which is connected to the core router through a switch and the core router is connected to ASA to the internet.Now sometimes we lose ping connectivity on the printer and it comes back up after 5-10 minutes and it stays live for 15 ...
Hi Guys,I have a customer who is going to host a VOICE services like providing SIP services to its customers.Can someone tell me the specific ports required to be opened up for this on ASA 5515X. I would rate it ASAP.
One of our clients wanted to create Webvpn portal access to specicif internal resource access. I had advised for Clientless SSL VPN (Webvpn).But Webvpn is not an option now since the client has anyconnect for essentials and anyconnect for mobile ena...
From the VPN server 861 I can ping 10.3.1.0/24 and 10.3.2.0/24 Here is the SH ip route output:S* 0.0.0.0/0 [1/0] via 67.79.57.x 10.0.0.0/8 is variably subnetted, 2 subnets, 2 masksC 10.3.0.0/16 is directly connected, Vlan1L 10....
Here are the Outputs of sh inventory and sh versionNAME: "CISCO2921/K9 chassis", DESCR: "CISCO2921/K9 chassis"PID: CISCO2921/K9 , VID: V06 , SN: XXXXXXXXXNAME: "VWIC3-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1 on Slot 0 SubSlot 0", DESC...
Jennifer,Thanks a lot!This is from inside to outside access. What about outside to inside access ? What happens when a SIP customer tries to access the SIP services sitting behing the ASA?
