About Robert Leibold

Robert Leibold · 01-12-2015

We have two chassis in our lab that were bought with only two power supplies. It's only lab, so not really concerned about power redundancy here. Is there a way to disable all the alarms not having redundant power causes? Just want to clear the cl...

Robert Leibold · 08-20-2013

Hi,I am trying to make use of the scheduled backup capabilities of UCSM and have a question. I have gotten it to work fine, but I am unclear on how many copies of the backups it keeps. The documentation simply states “Cisco UCS maintains a maximum ...

Robert Leibold · 03-15-2012

Hi All,We are having issues getting our fabric interconnects to sync time with our internal time source. We have a pair of the 6248UP's and a pair of the 6120XP's both running the 2.0.1s code, both show the same issue.. We have set our time source...

Robert Leibold · 05-04-2015

Hey Jarret, Thanks for the reply. Unfortunately, the power policy has already been set to non redundant and the chassis have been re-acknowledged. This does NOT clear the alarms. Looking at this support forums https://supportforums.cisco.com/discu...

Robert Leibold · 04-27-2015

Got pulled away and just getting back to this. Ack'ing the chassis does not clear the alarm. I also tried the suppression task using default-chassis-phys-maint and then ack'ing the chassis. The alarms persist. Any other ideas? Thanks,Bob

Robert Leibold · 01-13-2015

Hey Walter, Sorry, should've mentioned that I had tried that already. It did not clear the preexisting alerts that had been created. I also tried to acknowledge the alert as well, but it won't clear.Maybe if I re-acknowledge the chassis, it will pi...

Robert Leibold · 08-26-2013

Hi Padma,Thanks for tracking this down and sumitting the defect to get the docs cleared up.Bob

Robert Leibold · 07-08-2013

Does anyone know if this is still an issue? I am planning a 2.0(4a) to 2.1(1f) upgrade and was wondering what I should prepare for.Thanks,Bob

Member Since	‎09-28-2011 09:58 AM
Date Last Visited	‎09-25-2018 12:37 PM
Posts	20

User Statistics

User Activity

Disable UCS Manager power supply alerts

UCS Backup and Export Policy retention policy.

NTP in UCS.

Hey Jarret, Thanks for the

Got pulled away and just

Hey Walter, Sorry, should've

Re: UCS Backup and Export Policy retention policy.

Graceful restart when acknowlegde Host Firmware update