I recently replaced my MS ISA server with a Cisco 2921 as my gateway / firewall. I have it working fine with a single internet connection, dns, et al are set up in NAT and work great. I also have a secondary internet connection that I now want to s...
Hello, We are starting to replace all of our ISA servers with cisco routers with DMVPN. So far we are happy with everything but I ran into an issue. I just set up one of our branches, and the DMVPN works fine, but this location also needs a VPN...
Hello, I have a Cisco 2921 router. I have a few IPSec site to site VPN's configured and a terminal server behind the 2921. The problem I am experiencing is I also publish that terminal server to the internet. When I have a NAT setup to allow a...
I'm new to Cisco firewalls, I am configuring a 2921 with enhanced security using the CCP. I have found a behavior that seems strange to me and I'm not sure if I'm misunderstanding something or missing a setting. It seems that if I create a firewall...
Hello, We are in the process of switching our infrastructure of our routing/firewalls/vpns over to cisco. We are switching our first location and one of the issues I'm struggling with is windows authentication pass-through for internally hosted ...
Thank you for your response. I will put a backup route in for port2, as you say it isn't exactly what I'm looking for, but it is closer. Do I need to do anything with NAT for that to work as a backup?As to the pings, I am able to ping successfully ...
Thank you for the recommendation. I will try loading up the suggested IOS version (is there any issue with configs and rolling back to an older version I should be aware of?).If that doesn't work, since I just purchased, I will add smartnet and call...
Sorry to steal someone's thread (I did post my own thread also), but I have a very similar issue and see that it was a very recent thread so I wanted to ask, did you have any issues with this setup? I have the same setup, a DMVPN spoke and an ipsec ...
