We have started using an external SIP service for our phones.Normally traffic goes through an MPLS WANwhen going thru this service we need to NAT the phone subnet from a 10.xx.xx.xx network to a 172.xx.xx.xx network,but only when going to the SIP ser...

Citrix EDT requires users to listen on port  UDP 1494I cannot find anywhere whether NBAR classifies this as Citrix, everything I can find just mentions TCP 1494any ideas

I want to see statistics on my policy maps, so removed the service-policies from the interface as required, but see belowso far only one ISR4431 has it been applied correctly, 5 others come up with the message OS is 03.16.04b.S.155-3.S4bcannot do a r...

Below is the debug I am getting on the ASA, I find Meraki support not very helpfulPasses phase 1 but get a disconnect from the Meraki when doing phase 2anybody helpIKEv2-PLAT-2: (804): Site to Site connection detectedIKEv2-PLAT-2: (804): P1 ID = 255I...