Hi Friends,
We have site-2-site vpn on ASA FW, we used manage all the site2 devices remotely from Site1, problem here is I can manage (SSH & Telnet) Active FW remotely over VPN, but not standby FW IP over VPN from site1 also I am not getti...
Hi Yogesh, It not like that from R1 If you see the best route for 3.3.3.3 & 4.4.4.4 is from R3 & R4 right. So R1 will advertise the best route to R6.Note now both the router R3 & R4 primary link is UP only.When R3 & R4 primary link is down a...
Hi Yogesh, I tried this scenario in GNS3 its work fine for me.1) The traffic of R5 should divert via Primary SP i.e. R1 even if Primary link of R3/R4 is down. If its primary links goes down then R5 should take path from R2.I shutdown R3 prima...
Hi you can also use Boolean track with a OR. When track object 5 is down and track object 6 is up at that time track 10 won’t go down.When track object 6 is down and track object 5 is up at that time track 10 won’t go down.Track 10 will...
Hi If you set track delay then it will fine I guess.track 10 ip sla 123 reachabilitydelay down 40 up 40R3#sh trackTrack 10 Response Time Reporter 123 reachability Reachability is Up, delayed Down (4 secs remaining) 3 changes, last change 00:04:4...
R1#R1#R1#sh ip bgp neighbors 59.160.100.25 advertised-routesBGP table version is 3, local router ID is 59.160.100.50Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S StaleOrigin codes: i - I...