Hello!
We are beginning our deployment of Cisco ISE and not sure how to proceed on our domain for ISE. Should we use *.ise.company.com or just *.company.com? We understand the security advantages of using ise.company.com, but it is worth any issue...
On the Portal under Alerts -> All PSIRTS, we are attempting to acknowledge and clear vulnerabilities that we have addressed or do not apply to our device configuration. When we try to choose Change the Alert Status under Actions, it tells us we have...
Hello,
We have a number of items in our inventory that are currently in storage. We would like to add these to SNTC, so we have our total inventory, both in and out of production items, tracked in one location. What is the best way to acheive this?...
The thing I struggle with most is getting the correct parts. I have spoken with two VARs and gotten two conflicting answers. I thought I would open it up here.I have a remote site that is very small. I plan to purchase a 2901 ISR to configure as th...
I am plugging a device into FastEthernet 1/0/22. I cannot get DHCP across the trunk. Config is at link. Any ideas? https://www.dropbox.com/s/gsyai3e94s170hv/FRS.rtf
Hi Zach,
Thanks so much for the response! Do you know if out of production item records will sync up once they are put into production? Or, will there be two entries: one for when they were in storage, and another for when they are in use?
Thanks!
I have certainly fallen victim to that before. Thank you for the reminder. If you buy a "Voice Bundle" it comes with the PVDM3-16. This of course is not enough when a full T1 is involved....
Thank you for confirming what I know to be true, but I must ask. What would be an application of a FXS card? It is for me to run an RJ-11 cable to an analog phone while the FXO card is for me to run an analog line into our system? Am I grasping th...
