Hi all,Just wondering what your thoughts are on enabling broadcast forwarding and Cisco's recommended practice? I have not found too many links on the subject so if anyone has any links worth reading etc I'd be grateful! The client in question has a ...
I have four physical interfaces set up on my foreign controller in the following format:1 - Management (Primary) vlan 1002 - Management (backup Port) vlan 1003 - Dynamic-AP1 - Vlan 1004 - Dynamic-AP2 - Vlan 100Now interfaces 3+4 are a recent addition...
I am setting up a new Guest network with a captive portal and it seems to all work fine except when Apple devices go to sleep. When they come back on it isn't just a case of logging in again as it just indicates to the client that it is still connect...
Thanks Scott +5. The reason I have not set them up in LAG is ports 1 + 3 go to one chassis with 2 + 4 to the other so in the event of one failing the system will failover to the backup. They are separate chassis so not sure if multichassis etherchann...
Hi Juan,The compatibility matrix is a great place to start for this sort of thing:http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html#wp99531Whichever Controller you do buy will have to supp...
Just wondering if any experts have any advice on this matter? I am not sure if I'm barking up the wrong tree and want to ensure my advice to clients is accurate. Currently it is my understanding that what I've said above is accurate and with that in ...
