About Stefan Giera

Stefan Giera · 04-28-2014

Hi there, I would like to configure some IPSEC-Stuff on my ASR1001 with advipservices-License, which does not work: Router(config)#crypto isakmp policy 1 ^% Invalid input detected at '^' marker.For me it looks like there is a...

Stefan Giera · 04-04-2013

Hi there, we have an ASR1002 running zone-based-firewall with 2 zones: zone_ousidezone_phI have a common ZFW-configuration on that interfaces, e.g. <code>class-map type inspect match-any pass_cmap_in match access-group name pass-ipv4-in!class-map typ...

Stefan Giera · 04-12-2012

Hi, we have several ASR1001, some with advipservices and firewall-license, some with ipbase license. By accident I have found out, that the router throws out the following message when I write a "wr mem" command:routername#wrBuilding configuration......

Stefan Giera · 01-26-2012

We are using ZFW on an ASR1001 and have experienced a problem: when I try to use mtr (mytraceroute, see http://en.wikipedia.org/wiki/MTR_%28software%29), I am getting packetloss on all hops between the source and the destination. e.g.: <code> ...

Stefan Giera · 12-06-2011

Hi, I am trying to let ZFW inspect my dual-stacked hosts on my asr1001, but it does not work. It seems that ZFW just ignores ipv6-traffic and lets it pass uninspected. "sh ver" says:Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSALK9-M...

Stefan Giera · 08-31-2018

Hi there, these commands were very helpful, and I managed to access my ASA with ssh key only. But what is the configuration to be able to access the ASA in enable mode ? Thanks, Stefan

Stefan Giera · 06-07-2018

Hi Eliska, no, I believe You have to purchase the interface_10g for using the 10g-port. There is an RTU license for that. Just try it, set the port to "no shutdown" and the router will tell You what to do. -- Stefan

Stefan Giera · 05-02-2018

Hi Chengsheng, I found another thread, where You say: "For production deployment, you would need to purchase the licenses; you only need to purchase the 20Gbps throughput license because you got the 2x 10GE port licenses for free when you do so...

Stefan Giera · 04-27-2018

One more question: I still have the "interface_10g" as EvalRightToUse License in there, although I thought these license were included in the 20G_Throughput License: Index 33 Feature: interface_10g Period left: 5 weeks 5 days Period Used: 2 weeks 5 ...

Stefan Giera · 04-26-2018

Hi Chengsheng, thanks a lot, couldn't find that command anywhere. Now it works! Thanks a lot. Best regards, Stefan

Member Since	‎06-08-2011 01:05 PM
Date Last Visited	‎12-18-2019 12:07 AM
Posts	34
Total Helpful Votes Received	5

User Statistics

User Activity

How do I activate the IPSEC-License Feature on an ASR1001 with advipservices?

Zone based Firewall on ASR1002 with xconnect encapsulation mpls

ASR1001 IOS XE: "No l4r_shim subsystem is included in this platform."

Problems with Zone based Firewall and mtr (mytraceroute)

Zone-based Firewall and IPv6 on ASR1001

ssh key login in enable mode?

Re: ASR1001-x licensing

Re: ASR1001-x licensing

Re: ASR1001-x licensing

Re: ASR1001-x licensing