About jclerico

jclerico · 06-23-2012

Hello all,we have 2x CBS3010 (ie C3750 like for IBM BladeCenter) named SW1 and SW2.Both are connected with 1x uplink each to a central Catalyst 6500.The topology appears like a triangle and STP is needed to break loops.Question1:- if I stack both SW1...

jclerico · 10-09-2002

Hi gents,I would like to know if this feature can help in LAN switching environment where stp loops occurs. In case of stp loop, the box may crash because of a too high utilization of the cpu. There is no feature where we can set a threshold for the...

jclerico · 07-11-2002

Hi gents,I have received a new 2948G-L3 and have uploaded the latest IOS cat2948g-in-mz.120-18.W5.22b.bin.I do not undertsand why I cannot enter the Vlan Database using the "vlan database" in privilege mode !!!!!I hit the following message: "No Virt...

jclerico · 06-25-2012

Many thanks Reza .I am trying to figureout the different options to get ride of STP between the:- Distribution Block made of C6500 or Nexus 7000- Access Block made of 2x embedded Blade Switch Cisco.I am suggesting many design options which are:1- If ...

jclerico · 11-05-2004

Hello, I have the same issue on a C7200 router.Check if you have "ip tcp timestamp" in global config. If so, remove this command and reload the router. Let me know. Here is my e-mail: clericoj@fr.ibm.com

jclerico · 11-22-2002

Hi,I spent a couple of hours on a CSS (SNTP client) and a C7240 (NTP server)...Here are some checking to do:.1/ verify first that both client and server use the same timezone:Do a show clock and you will get the timezone in the bottom.If the timezone...

jclerico · 07-18-2002

Could you please send me via e-mail the exact IOS level you are running ?I have a couple of 2950G running 12.1(6)EA2a that stops replying to icmp echo.There is probably a bug ?? Did you open a case ? if so please let me know. On my side the case is ...

Member Since	‎07-11-2002 10:28 AM
Date Last Visited	‎11-06-2023 05:00 AM
Posts	7

User Statistics

User Activity

Can we get ride of STP by using Stacking and Dristributed EC ?

Broadcast Suppression Feature

2948G-L3 vlan database

Can we get ride of STP by using Stacking and Dristributed EC ?

Re: cannot Telnet to a router with DLSW and OSPF

Re: problem with sntp on css11000

Re: Config problem with Catalyst 2950 series