i've CPI 3.1.4 DP7 installed and when discovering N9K-C9372TX-E the CPI recognize them as unsupported cisco device.
after reading in the device supported i found out the N9K is suppose to be suppurated from any NX-OS version.
does anyone ha...
is it possible in CPI 3.1.4 to receive email notification only from a group that i've created under 'user defined' and not from others?
i've tried to use the suppress option in the Alarm Policy but i'm still getting an emails from devices fr...
i install a fresh CSPC collector (2.5) and when trying to upload the inventory i'm getting fail status.
the server is connecting to the internet via Proxy.
T-Shoot I've done:
1. verify that there isn't any deny packets in the FW.
2. verify th...
i opened a TAC.
here is the answer:
i use this url on the CPI to run SNMP WALK to device,
TAC - email
" Navigate your browser to the following location
I have the same problem but with N9K-C9372TX-E.
i have CPI3.1.4 DP7 and the CPI recognize the N9K above as unsupported cisco device
i search for bugs but i didn't find anything
someone please assist
i've a question regrading the Alarm Policy.
i have CPI 3.1.4, and if i'm understanding correctly if i create a group under 'user defined' and then going to the alarm policy --> interface-->link down and put all the other groups in suppres...