Rene ,
Though it doesn't look to be a config issue .it would be better if you keep a very basic configuration removing and timeouts and qos and then share the same results .
Going by the looks of it , appears to be a phone connecting because i see ...
Hey ,If you need to control enable authentication through ACS then we need to have command on switch .aaa authentication enable default group tacacs enableOnce you have this command it will be a global change for all the users . Now everybody who log...
Please check the monitoring and reports for failed authentication .The reason for failed authentication is quite informative and easy to understand .Sent from Cisco Technical Support Android App
Hi Oleg ,The very first thing you need to do is to make sure an authorization packet is sent to Tacacs Server for commands at config terminal mode .For this we need command on IOS ."aaa authorization config-commands"Now rest of the work has to be don...
Greg ,Please point the enable authentication to AAA-SERVER ::"aaa authentication enable default group tacacs+ (fallback) .Doing this the user will have to enter the AD password once again for enable as well .Since the AD account password will be uniq...
