About Ed Johnston

CPAM User PIN Operation Issues · 10-23-2014

I have approximately 30 new users I have created only PINs for to be used on Keypad access. Only half of them work. All created the same way and all configurations of the users are identical. CPAM version 1.5.0. Server has been rebooted, configurat...

Ed Johnston · 08-07-2014

Has anyone ever used the Axis P7224 encoder blades with 7.5.1? If so which, drivers did you use? Currently I am running into issues with getting the multiple ports to to be available. I am trying to use the axisp7404_2_n, axis7046_2_n, and axis243q...

Ed Johnston · 07-10-2014

We have upgraded a VSOM to 7.5 and set up SASD on 8 PC's with different views of the site. We are receiving the following error."you have reached recommended limit of 48 video streams. Please consider closing some Walls/Views to ensure proper stream...

Ed Johnston · 07-09-2014

Has anyone ran into this after an upgrade from 7.2.0 to 7.5? When trying to login it navigates to the login page but then the error popup I get is "Operation failed: Application is still initializing. Try again after some time". They have been runn...

Ed Johnston · 12-19-2013

Has anyone ran into this problem. I have a 2RU that we replaced the drive in 2 weeks ago and the drive has never completed the rebuild and is stuck in that state.

These are just PIN codes. We · 11-05-2014

These are just PIN codes. We added the same PIN to the badge number as well. I can authenticate the PIN to CPAM and the gateway with access granted but at the keypad it denies access with the above Badge ID: 65535 error. Thanks Scott!

Anybody? · 10-29-2014

Anybody?

Ed Johnston · 09-16-2014

To let those who viewed this thread know the answer. There is no way to get this encoder to work that I have found and Cisco stated that they would have to create a custom driver for it. Which is understandable since it was not on the supported li...

Ed Johnston · 08-07-2014

Hi Scott, I tried the Unattended Mode but it still did not alleviate the issue. Look into alternative methods atm. Cheers,Ed

Ed Johnston · 07-10-2014

Thanks Scott! Once I opened a TAC case i remembered that bug. I worked with Shrayans Agrawal to get it resolved two were that particular bug and one failed to reload the VSOM package during the upgrade. We were able to recover VSOM by reloading the ...

Member Since	‎07-22-2008 12:53 PM
Date Last Visited	‎08-18-2017 04:03 AM
Posts	31
Total Helpful Votes Received	3

User Statistics

User Activity

CPAM User PIN Operation Issues

Cisco VSM 7.5.1 with Axis P7224 Encoder Drivers

48 Stream Limit - Cisco SASD 7.5

7.2.0 to 7.5.0 Upgrade Initialzing Error

CIVS-MSP-2RU, Stalled Rebuild State

These are just PIN codes. We

Anybody?

To let those who viewed this

Hi Scott, I tried the

Thanks Scott! Once I opened a