Hi,We inserted NC6-60X10GE-M card in NCS; it appears in admin mode but doesn't appear in XR mode. I have attached the logs. Please advise.Best regards!

Hi,I am looking for best practices of doing such a conversion. I am not able to find any such migration on cisco official upgrade guides. Please advise!  Best regards!         

Hi,As per the configuration guide, maximum buffer size configurable per class is 491520 bytes. If i have a class with bandwidth percent 90, which will reserve 900Mbps out of 1Gig port, the latency offered by this buffer will be 4.3ms. It seems that t...

Hello,Please clarify if the following features are supported over EoMPLS on 7600 platform (IOS 15.0) used as PE:DSCP classification on ES+ EVC when xconnect is under SVI.DSCP classification on SVI linked to ES20 EVC when xconnect is under SVI.Police ...

Hi,Regarding multicast:- if i have a hub and spoke scenario in which hub is the RP & Mapping agent, and when I ping from one spoke router to another spoke router , I got one reply and then timeout . I tried to figure out by debugs and what I understa...