Hi,I have a scenary with two virtual controllers, one acting as primary and the other acting as secondary. As i`m using 1700 series AP i selected version 8.0.120.0. The aps are able to register to primary vWLC1, but if i shut down it, they cannot reg...
On 5760 with 3.6 version, after correct login, the custom succes page is never shown, it is shown the basic one. Login, failure and expired are correctly shown but not succes one. Nor with custom bundle neither with my own made ones.
Is this possible?On 5508 i am able to create a RF profile and after i can apply it to an AP group, but i dont find the way to do this on IOS XE. Any help appreciated.
Hi,1) I had similar problem with Avaya switches and there is a bug on cisco controller (CSCup72151). Open a case on TAC to get a version 7.6.130.(5+)2)You showed on the photo, "Medium power" means 3x3:3, if you are using 4x4:3 it will show instead "F...
Do you mean, AP image? What version?In other thread i saw this message and someone saying that was just a bug but not really affecting the process.If i do on AP, "clear capwap private-config" then the AP can register the secondary vWLC, but if then, ...
No firewall. This a layer 2 topology, both controllers and AP are on the same subnet.Of course there is ping.It seems that from the point of view of the controller everythings is ok, it says "record consumed or succes", but i never get the final resp...
sh ver output from the AP:Ingenia_1700>enPassword:Ingenia_1700#sh versionCisco IOS Software, C1700 Software (AP3G2-K9W8-M), Version 15.3(3)JA4, RELEASE SOFTWARE (fc1)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2015 by Cisco ...
