About Thulasi Shankar

Thulasi Shankar · 09-16-2011

IntroductionConfiguration IntroductionThis document provides a sample configuration for changing the external interface IP address on ASA. Configuration To change the external ip address, we need to go to the external interface, and enter the new ip...

Thulasi Shankar · 02-18-2014

Hi,This is a known issue caused with the change in certificate at Trend Micro used to sign pattern files. Please find the documentation below :https://supportforums.cisco.com/docs/DOC-40231This issue is addressed by CSC Module patch 1140 for version...

Thulasi Shankar · 07-04-2013

Hi Gangadhar,It is normal to see the promiscuous interfaces go up and down. Another scenario is during configuration changes. When signature updates are installed, configuration changes made, or when signature tunings are performed, it is expected to...

Thulasi Shankar · 07-04-2013

Hi ,It seems like the mainApp has hung on the IPS.Two known defects which might cause the same : CSCtj86988 and CSCuf20148. However, CidDump and few other debugging outputs are required to investigate this further and would give us a better insight o...

Thulasi Shankar · 07-01-2013

Hi Gabriel,Please find the steps below to enable email notification through IME :http://tools.cisco.com/squish/B9497Hope that answers your query.Thulasi Shankar

Thulasi Shankar · 07-01-2013

Hi ,Please execute a "session ips" from the ASA to access the sensor module. Post this, you may execute "Show config" on the sensor to verify the configuration. The default username/password on the sensor module is cisco/cisco. IPS run as a licensed ...

Member Since	‎10-13-2010 05:42 PM
Date Last Visited	‎08-29-2017 03:05 AM
Posts	13
Total Helpful Votes Received	20

User Statistics

User Activity

Changing the External Interface IP Address on ASA

Cisco ASA-SSM (Trend) not updating

IDS Links are flapping in 6509

Cannot communicate with mainApp (getVersion)

Need IPS to email automated alerts

ASA 5515 with IPS Module