I'm interested in knowing what others are doing lately with regard to device choice on a private WAN Metro Ethernet connection when feature requirements are met by both an L3 switch and router.
Thanks,
Chris
At present I have two DMVPNs in place over the internet. One hub per DMVPN. All spokes and the hubs utilize the internet for the DMVPN. I have one new location that has a metro-ethernet link from it's spoke router to one of the hub routers (this hub ...
Hello,
I'm looking for thoughts, opinions, and experiences with opting to go with Nexus in the LAN core vs. a Catalyst 4500/6500/6800. Not concerned about FWSM/WISM modules or PoE - purely L3 routing, multicast rp, etc.
Thanks,
Chris
Are the settings and policies of a local ASA with FirePOWER wiped out or overridden upon adding the device to be managed by FireSIGHT Management Center? I have an ASA which has been functioning standalone with FP and need to now add it to FireSIGHT D...
Is there a way to use a wav file recording as the standard greeting for a user mailbox as opposed to recording the greeting from an IP phone? Platform is Cisco Unity Express 3.0.Kind regards,CB
The second DMVPN is for PfR and to distinguish between high level SLA / Quality Internet connections vs. more bulk internet connections as secondary such as cable modem. EIGRP is used and we have route tagging in place to prevent loops. We're going t...
Thank you for your response.
Campus, not Data Center. I'm aware of their place in the DC. As I mentioned, these will be LAN core - that is where they will sit, and those are the services they will provide - L3 core, multicast rp., WAN routers, firew...
Thanks, the information you provided aligns with what I've been able to come up with so far. We are looking at a Valcom ring device which would utilize horns throughout the plant. I'll post again when I have more information on this project.
Thanks - that was the case. The call-forward all and call-forward night-service were reverse what I thought they would be but it doesn't really matter I suppose. The call-forward all is where the call goes when night-service is enabled, when it is di...
When night-service is activated, the calls are still going to the call-forward all number (receptionist ext.) on the floating extension - they do not go to the call-forward night-service specified number.
