Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We need to use a longer than standard camera cable for SX20. We want to use a Cisco Split cable ( separate female HDMI and RJ 45 ) and 10m HDMI and FTP cables. Unfortunatelly I have found no information about FTP cable pinout. It is a straight or cro...
Hi,When you select presentation source on Profile's touch you could choose from the all video inputs.As we use only 1 input on C60 ( for ex. HDMI 2 or DVI 3 ), is it possible to have on the screen ONLY this input ?This is a request from our customers...
Hi,We have an Edge 95 MXP with a strange behaviour. It restarts every 2-3 minutes. Between restarts, it works normally ( calls, web access,etc ).We performed a factory default and eee with no change in behaviour.Software version is F9.0.1. We could n...
Hi,I haven't found out in documentation if the following scenario is possible :- 1 TMS with TMSPE- 1 VCS Expressway- Multiple VCS Control ( different locations linked by VPN )Right now : - Jabber Video is setup on TMS with different domains- Jabber c...
Hi,I have an issue with a VCS Expressway. I have no connection and the error on the front LCD is : "Missing LAN:eth3 "Do you have any idea of this error ?Thank you !
I have the following scenario :
- user with webex account
- MX800 registered on Webex Cloud
- user schedules a meeting through user account web interface and send an email to the participants ( H.323, SIP devices, SfB users, Webex users )
Is it po...
Hi,Is it possible to add a button on Touch 10-CE9 to turn off ( not mute ) MIC 1 and 2 and turn on ( not mute ) MIC 3 and 4 ? Or a toggle button for 2 scenarios :- on ( activate button ) -> MIC 1 @ 2 OFF and MIC 3 @ 4 ON- off ( activate button ) -> M...
Hi Richard,I better way of using long cable for SX20 camera is to use the supplied camera cable ( 3m with special connector to the codec and HDMI and RJ45 connectors to the camera ) and to attached HDMI-HDMI and straight LAN cable to it using female-...
Fuse 2A 250V Slow, 5 x 20mm. Push and twist anti-clockvice to release.I haven't seen yet a situation when the issue was the DNAM itself. The issue was always the fuse....
