About Harrie Hendriks

Harrie Hendriks · 03-24-2020

Hello, For network access we used dot1x for authentication. Now we need to change all the dot1x access interfaces, but not the static access interfaces. Is in prime infrastructure 3.7 a configuration method where I can setup the next configuration IF...

Harrie Hendriks · 10-16-2019

Hello,We have a problem that ISE 2.4.0.357 has lost the Network Devices and it can not be read them and will hung on status Loading.(See picture). If I try to Add a device, I have an Error "Failed to create network device - system error!" Best Regard...

Harrie Hendriks · 10-07-2019

Hello,We have a third controller and we want to move some (300) accesspoints to that controller.But I cannot find in the controller software or in Prime infra (3.4) how to do quickly, without to click on each Accesspoint and move them to that control...

Harrie Hendriks · 10-24-2018

Hello, We are made every Saturday a backup of the configuration with a kron script. We have (in this example) a 2 stack catalyst 3850 switch. kron occurrence Backup at 10:12 Sat recurring policy-list Backup!kron policy-list Backup cli copy system...

Harrie Hendriks · 10-03-2018

Hello, Today we had a syslog message from a Catalyst 3850 switch with IOS 03.06.08E 3-10-2018 15:38:24 c3850-s1-109-12 Notice ILPOWER-5-MOSFET_FAULT 41502: Interface Gi1/0/30: Mosfet fault c3850-S1-109-12#show verCisco IOS Software, IOS-XE Soft...

Harrie Hendriks · 06-26-2023

We have the same problem with a 9500-40A. We used 17.6.3 %PLATFORM-3-ELEMENT_TMPFS_WARNING: Switch 1 R0/0: smand: 2/RP/0: TMPFS value 41% above warning level 40%So looks like updating the switch is not the solution (so far)

Harrie Hendriks · 06-03-2020

The ACL are as followed.access-list 99 permit X.X.1.0 0.0.0.255access-list 99 permit 192.168.1.0 0.0.0.255access-list 99 deny any log snmp-server community rw-name rw 99snmp-server community ro-name rw 99 line vty 0 4 | line vty 5 15 access-class...

Harrie Hendriks · 06-02-2020

I have the same problem: Device '10.10.X.X'. Authentication failed for request from '52.73.169.169'. The Management address of te switch is a private range 10.10.X.XThe address 52.73.169.169 is an external adres and was found 3622 times in de AbuseIP...

Harrie Hendriks · 09-19-2019

We have the problem too with a Catalyst 9300 access switch and a Catalyst 9500 distribution, with vrf.We testing with a catalyst 3850 and even these switch gives the error. The solution we found, and works: ip tftp blocksize 512 In an other situation...

Harrie Hendriks · 05-22-2019

In the last few months I let it some resting, but the problem is stil there.all Backups from a Stack are bigger then 64 KB, but on the TFTP Server I recieve 64KB.Maybe there is some new here who knows the problem. Best regards,

Member Since	‎11-24-2009 11:35 PM
Date Last Visited	‎02-21-2024 05:47 AM
Posts	34
Total Helpful Votes Received	27

User Statistics

User Activity

Prime infrastructure 3.7, conditional change of network interface

ISE 2.4 Lost Network Devices, unable to ADD devices.

Move bulk accesspoints to an other controller

Max filesize in kron and event manager TFTP Backup

CSCvj76259 on a Catalyst 3850 with IOS-XE 03.06.08E

Re: CSCvp73396 - Cat9300 Memory Leak due to nyq_rsync.log - 2

Re: Cisco Prime Alarms

Re: Cisco Prime Alarms

Re: Error opening tftp (Timed out)

Re: Max filesize in kron and event manager TFTP Backup