Hi Frank, Currently there is no support for acces-list with snmpv3, however an enhancement request has been submitted for the N7k:http://http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtn21553This fea...
Hi Stephan, Allow me to clarify myself, vPC peer-switch has been introduced into the N7k to improve the convergence time during vPC primary peer device failure/recovery. Without the vPC peer-switch feature, vPC primary peer device failure and recove...
Hi Robert, Could you share the output of show lacp counters interface port-channel15?If we would be seeing a lot of difference in the RX and TX of LACPDU's we can assume 3 things, either we're not receiving them and we have a link problem, they're ge...
Hi, When configuring peer-switch the N7k it will appear as a single STP root in the Layer 2 topology, but since your VSS is the root bridge it states non-operational as peer-switch is only operational on a root bridge.Please note that the non-operat...
Hi, You're approach for replacing a N5996UP chassis is definetly valid.With regards to your question on the License transfer, you can transfer the license by using the Product License Registration Toolhttps://tools.cisco.com/SWIFT/LicensingUI/Quickst...