This menue point to Renew ISE OCSP Responder Certificates is not available. Does anybody had the same issue?There are no more options a you can find within the picture.
Hello Team,I try to upgrade large number of NCS55 and would like to use ZTP helping me with iPXE. For that I use a Linux machine with dhcp an web server. The DHCP Server is able to differentiate between iPXE and ZTP and if I start iPXE by command it ...
I try to install a Nexus9000v OVA Imgage on my ESXi6.5 Host. It doesn't matter if I use release 7.x or 9x it start's booting and stop as you can see in my pic below. Was anybody else able to get it run?
Customers complain sometimes that the RDP Plugin on the ASA WEB VPN Portal is not working very well.
Does anybody know a way to use a Windows RDP Gateway together with the WEB VPN Portal?
One of our customer had an issue in one of his data centers. The secondary node rebooted and after that the primary node has a locked DB where no changes could be made via gui. Only a reboot of the complete cluster was the solution. Is this a normal ...
I used one unit for LAN Automation and later I attached the other one to create a StackWise-Virtual stack. At the end I removed the uplink config and cretated a port channel on both ends and added the config to the port channel interfaces in routed m...
Hello Christian,We run this solution with ZTP since two years now. I solved it with TAC. You need for ZTP a signed Golden Image. If you bake one by yourself it will run with PXE boot but not with ZTP. RegardsHubert
You must activate the right to use license and change the bootlevel with the commands:
license right-to-use move securityk9conf tlicense boot level securityk9wrreload
Hello glmorris47, thank you for your answer. I got this hint already on CL from some Lab Engineers but it does not work on my System. Maybe the ESXi 6.5 System coming with BE6000 on C220 is not able to support a Serial Connection. I will try to use a...
Hello Marce1000, I did not check this notes before. Now as I saw it, where should I enter this command below to convert the file to old? nexus9000v-user@fe-ucs-dt13:vmfkstools -i nxosv-final.7.0.3.I6.1vmdk nxos-final.7.0.3.I6.1.esx.vmdk
