About JeremyL

JeremyL · 07-13-2010

Needed to know what is the maximum number of SIP trunks supported on a CUCM 7.1.3b server and/or cluster.Also, can the SIP trunks be incremented by port number (I know 5060 and 5061 are reserved) - for example, using the same IP address to another 3r...

JeremyL · 01-25-2010

Has anyone utilized the new multiple MOH sources in SRST 8.0 - was looking for an actual configuration when SRST is in standby mode (using CUCM for MOH - spoofing). I have downloaded the new SRST 8.0 MOH Enhancement/New Features Guide, but it is sor...

JeremyL · 01-21-2010

Much of the marketing hype around these new phones sets is the option of a 50% power reduction when the phone goes into sleep mode. So, the question is what does it take to put these phones into sleep mode? CUCM does not have any options - only for...

JeremyL · 03-26-2009

I am trying to add a 2821 via MGCP to CUCM with the HDV2 card, but I do not see the typical "onboard card" selection in the MGCP configuration. Not sure what else to select under the 2821 config in CCM. I added a 3845 without any issues - has the "...

JeremyL · 08-03-2008

Does anyone know what needs to be filled in for the "URL Messages" field in the enterprise parameters to get the voicemail button on the 7971 phone to work? Thanks.

JeremyL · 01-31-2020

XMPP is required for user authentication and the CMS Recorder service (XMPP client). XMPP server only needs to be running on the CMS core servers (not needed at the edge).

JeremyL · 08-28-2019

As long as the CMS CallBridge and CallManager certs were both signed by the same CA, you just need to upload the root CA chain (and intermediate root certs, if any) as CallManager-Trust certs.

JeremyL · 05-23-2019

Yes, is still required for any WebRTC connections...uses XMPP for authentication. Does not have to be enabled at the edge though, only in the core.

JeremyL · 01-24-2019

The thick client can be used through the expressway for media termination (TURN services) only (beta feature). CMS edge is still required for XMPP authentication for the thick client. Keep in mind the thick client (CMA) will be phased out (along wi...

JeremyL · 12-22-2018

Safari is all that is required for the iOS devices (can remove the CMA app) and yes, does work with Expressway/TURN/Webbridge proxy solution (tested it with Expressway 8.11.4). Edge and Firefox browsers are the ones that have issues with the TURN/TC...

Member Since	‎12-09-2004 06:25 AM
Date Last Visited	‎02-28-2021 01:51 PM
Posts	95
Total Helpful Votes Received	38

User Statistics

User Activity

CUCM 7.1(3b) and Maximum supported SIP trunks/Port Numbers

SRST 8.0 and Multiple (5) MOH Local Sources

6941 and deep sleep option

CUCM 6.1.2 - 2821GW - NM-HDV2-2T1 with MGCP

CUCM 7 - 7971 and URL Messages Enterprise Parameter

Re: Cisco Meeting Server - WebRTC and XMPP deployment question

Re: CMS Conference Bridge not registered

Re: CMS 2.6 - is XMPP component required in new install?

Re: Cisco CMS Edge and Expressway

Re: CMS and WebRTC support for IOS iPhone and iPad