hi,I have asr9k i want to assign video license to slot but i unable to do anyone help me..:)FeatureID: A9K-ADV-VIDEO-LIC (Slot based, Permanent) Total licenses 3 Available for use 3 Allocated to location 0 Active ...
hi,why this log message keep appearing??RP/0/RSP0/CPU0:9010-2#RP/0/RSP0/CPU0:9010-2#RP/0/RSP0/CPU0:Oct 8 14:50:37.023 : isis[1001]: %ROUTING-ISIS-4-P2P_CONFIG_MISMATCH : L2 hello-padding configuration on P2P interface Bundle-Ether21 will not be used...
hi,please help me how i can copy this file c12k-diags-3.9.0 to disk0:RP/0/0/CPU0:IOS-XR1#dir Sun Oct 7 16:50:41.165 UTCDirectory of compactflash:/usr2300706944 -rwx 21478082 Sat Sep 29 07:34:26 2012 c12k-diags.pie-3.9.02300707040 -rwx 232884...
hi,1. Install adv video pie.2. Install adv-video-license (a9k-adv-video-lic is a chassis based license, not a slot based license so you need only one license for chasis)3. Go to admin config mode and assign to all slots, check below config. i.e:licen...
Router 1 config outup:---------------------------------RP/0/RSP0/CPU0:9010-1#sh run int bundle-ether 12Tue Oct 9 14:26:10.591 KSAinterface Bundle-Ether12 description "EtherChannel to 9010-2" mtu 9216 service-policy output EGRESS-NNI ipv4 address 10....
Please check below output.RP/0/RSP0/CPU0:9010-1#sh install log 19 detaiMon Oct 8 10:56:53.956 KSAInstall operation 19 started by user 'admin' via CLI at 16:50:39 KSA Sun Oct 07 2012.(admin) install add /disk0:asr9k-video-p.pie-4.0.3Install operation...
