The problem I experience is that the router (ASR 901) will not NAT anything coming from the connected switch (Cisco 2960). I have 2 vlan trunking up to the ASR 901. The ASR 901 is configured to use the tagged traffic from the switch via the bridge do...
How are you wanting to separate the traffic (inbound, outbound, by subnet), will Internet traffic be in involved?Sent from Cisco Technical Support iPhone App
The access list in your example would block a host route of 1.1.1.1/32 from being advertised, but if a larger /24 such as 1.1.1.0/24 is being advertised, it will still direct traffic to that router if no longer match exists.Sent from Cisco Technical ...
