About G.I II

G.I II · 01-31-2014

i have configured BDI using the configuration below and the IP is now pingable but i can see traffic on the 2 ports this is why i am afraid of a loop and i stopped it. If we compare it to BVI, we should have 1 port blocked usually by STP no? Do y...

G.I II · 09-23-2013

Hi, diameter server is showing as up in show diameter authentication servers but we are not able to relay the authentication requests from the ASR5k to the server, below the logs received, any idea?2013-Sep-23+18:07:13.732 [diameter 92150 debug] [1/0...

G.I II · 11-12-2012

Hi,we have a WS-X6K-SUP2-2GE running CATOS software, we are facing a TCAM exhaustion.I would like to know the following:1. during an exhaustion, based on what ACLs will be kept in hardware or moved to software? the name or number gives any precedence...

G.I II · 05-02-2012

Hi,Is there any procedure to follow when changing the IP address of an ASA on which RAVPN with certificate is configured

G.I II · 04-19-2012

We have a stack of a 3750E with a 3750X, when we turn off the master, a disconnection occurs for around one minute while only one request timeout is seen when the slave is turned off. Is this normal?Details: in other words, when the slave switch is e...

G.I II · 11-12-2012

3. if one entry of a 100 entries ACL contains the 'log' keyword, what is known is that it will be treated in software but all the ACL moved to software or only the ACE with log keyword?

G.I II · 04-30-2012

test done and what was mentioned in the previous post resolved the problem

G.I II · 04-19-2012

i think it should help also for layer2, this is what i found in my research :With LACP, the system-id uses the stack MAC address from the stack master, and if the stack master changes, the LACP system-id can change. If the LACP system-id changes, th...

G.I II · 04-19-2012

ok, do you think that 'stack-mac persistent timer 0' command which is still not implemented will help in decreasing the downtime from 1 minute to mseconds or it will just decrease the time needed to reach the management IP again?

G.I II · 04-19-2012

Hi Reza,Layer 2 failure ~ mseconds is when the master switch fails? BR

Member Since	‎11-24-2009 12:56 PM
Date Last Visited	‎10-21-2020 12:11 AM
Posts	13
Total Helpful Votes Received	20

User Statistics

User Activity

ASR1k - BDI

ASR5k - Diameter Authentication

6500 - WS-X6K-SUP2-2GE - TCAM exhaustion

IP address change on ASA on which RAVPN with certificate is configured

3750 stack master failure

Re: 6500 - WS-X6K-SUP2-2GE - TCAM exhaustion

3750 stack master failure

3750 stack master failure

3750 stack master failure

3750 stack master failure