Problem has been solved - matching for incoming dnis was different, to make it clear: 1w6d: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore: Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=3 1w6d: //-1/5131ED800000/DPM/dpAssociateIncomingPeerCore: Calling Number=13, Called Number=800123456, Voice-Interface=0x0, Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE, Peer Info Type=DIALPEER_INFO_SPEECH 1w6d: //-1/5131ED800000/DPM/dpAssociateIncomingPeerCore: Result=Success(0) after DP_MATCH_INCOMING_DNIS; Incoming Dial-peer=11 1w6d: //-1/5131ED800000/DPM/dpMatchPeersCore: Calling Number=, Called Number=800123456, Peer Info Type=DIALPEER_INFO_SPEECH I guess it happened because incoming-called command has higher priority than destination-pattern and it just matches that different dial-peer. If u have any ideas in this case, pls contact me. Otherwise I assume this config is working correctly. Thanks a lot aokanlawon and others With best regards Mark
... View more
Hello all, i'll appreciate any help with my DTMF issue, here is quick overview: Cisco IP Phone 7941 SCCP/SIP -> CUCM 8.6 -> GW Router 2801 (ipipgw 1 2.4(24)T8) -> ASA FW -> SIP Trunk provider. SIP Provider is using DTMF SIP INFO method (inband-voice in SIP signalization). For inbound calls dtmf works fine, problem is with an outbound calls (initiating call in-to-out) on 7941. I was testing 7940 SIP and it worked fine in both directions, but it needs to be working on 7941 as well as on 7940. I did a lot of troubleshooting and configuring about this kind of behaviour, but nothing solved this issue. I guess I can provide you packet captures on CUCM, GW for using with SW Wireshark and a debug on GW. Whatever will help us to find the source and solution of this issue. Thanks a lot for any advice and ideas while also apologize for non perfect english. With best regards Mark ----- In the attach I give you last output from "debug ccsip mess..." command on R2801 (both non/working DTMF on 7941/7940 SIP) and its probably very common config (one of many setup).
... View more