About Colin Higgins

Colin Higgins · 01-09-2020

I have a very old WLC (4402) that I inherited at a client site. One of the access-points that connects to this WLC had to be wiped and re-installed, and since it is not a LWAPP, I am a bit unsure as how to get this to connect to the WLC The AP requir...

Colin Higgins · 11-20-2019

I have a 4400 series controller running 5.9.193 code. In the last few days, 50% of my access-points no longer appear in the controller, even though I can ping the access-points from the controller. I can see the APs in CDP on the switches I have trie...

Colin Higgins · 07-17-2019

I have a WLC 5508 running 8.5.120 code. I have wireless client who need to print from Apple devices to a HP M426 laserjet printer. So I set up the WLC for mDNS by doing the following:1. Enabling mDNS snooping2. Enabling global multicast and IGMP snoo...

Colin Higgins · 04-24-2019

I am looking for a four-post rack that will work with a Cisco Nexus 7706 problem is, that device is 32 inches deep, which is non-standard. I can't seem to find a rack that will work. Can anyone point me in the right direction or make a recommendation...

Colin Higgins · 04-09-2019

I am trying to get a webauth certificate loaded into my 5508 WLC. Here is what I have done: 1. Generate a CSR from the WLC CLI2. Sent the CSR to Entrust and received back 3 certs: server, intermediate, and root3. Combined the contents of these three ...

Colin Higgins · 01-09-2020

There are other APs of the same type connected to the controller. They have static IPs assigned

Colin Higgins · 11-20-2019

welcome to state governmentthing is completely end-of-life and they never replaced itand it is mission-critical

Colin Higgins · 07-17-2019

I checked the peer-to-peer blocking it was already disabled

Colin Higgins · 04-12-2019

I just learned that if you generate the CSR using the WLC CLI, you do not have to use OpenSSL to bind the private key to the combined certificate. You only have to put together the three certs (server, intermediate, root) into file and name it final....

Colin Higgins · 04-02-2019

looks like when you do the webauth certificate, it generates a file called final.pem that can be uploaded from the controller I did that, but now my certificate authority is telling me it is invalid, because it contains the full chain. I have no idea...

Member Since	‎12-12-2010 01:42 PM
Date Last Visited	‎01-10-2020 12:13 AM
Posts	479
Total Helpful Votes Received	25

User Statistics

User Activity

Getting a BR1310 to connect to a WLC

LWAPPS not registering with controller, but are up and pingable

Cannot print using Airprint to HP printers through WLC 5508

4 post cabinet / rack for Nexus 7706

Problem installing webauth certificate into WLC

Re: Getting a BR1310 to connect to a WLC

Re: WLC running on 5.X.X.X???? WTF!

Re: Cannot print using Airprint to HP printers through WLC 5508

Re: Problem installing webauth certificate into WLC

Re: Location of webauth certificate?