About ateeqs.net

ateeqs.net · 03-09-2015

Hi expert,while working i noticed my downstream devices were running on MSTP and it was a requirement to change upstream into RSTP and when i change upstream device into rstp i lost the connected to downstream also cant see that device in cdp neighbo...

ateeqs.net · 10-25-2014

Hi Expert,Please help me to understand of using forwarding address of static route after determining the interfaceexample:ip route xx.xx.xx.xx 255.255.255.0 GigabitEthernet0/0 x.x.x.x name DO_NOT_ADVERTISE_TO_MPLS thanks for assistance.

ateeqs.net · 10-21-2014

Hi Expert, Is there any command or method to disable the igmp on L2 interface of Nexus 5k. Your help would be greatly appreciated. thanks.

ateeqs.net · 09-06-2014

Dear Expert, Using BGP MED, Can i influence a single subnet?We have multiple subnet which is advertising to our ISP,168.165.89.X168.165.56.X168.165.122.XWe have in plan to configure metric to specific route 168.165.89.X which will traverse through ou...

ateeqs.net · 08-30-2014

Dear expert, Need you suggestion to configure the NSSA area. What would be the best practice to configure NSSA? Can we make area0 as NSSA, if we can not make area 0 nssa can some on please help me to understand why? Thanks for you suggestions.

ateeqs.net · 03-09-2015

thanks for you kind response.Its very simple topology we have trunk between these two switchesUpstream we have : c3750e-universalk9-mz.122-58.SE2/c3750e-universalk9-mz.122-58.SE2.bin"Downstream we have : c2960s-universalk9-mz.122-55.SE7/c2960s-univer...

ateeqs.net · 09-06-2014

Thanks Akash. Appreciate you for notifying my mistake, i have made changes and it works as expected.

ateeqs.net · 09-02-2014

Hi Kevin, It can be possible to generate the auto report in Solarwind too. Presently in my organization, we have a separate team to support Solarwind,they have created a script to generate auto report from Solarwind for my team to around 16 sites cir...

ateeqs.net · 08-31-2014

Agreed with Akash.You can use the meximum-path 2 in order to achieve dual ISP with different AS, its a hidden command in BGP bgp bestpath as-path multipath-relax.#Maximum-path 2#bgp bestpath as-path multipath-relax

ateeqs.net · 08-30-2014

Got that.... thanks Folf. So basically area 0 is a capable of Type 5 LSA, in my infra if ASBR is connected to the area0 so not need to configure the NSSA. Thanks for you input.

Member Since	‎09-15-2010 12:18 AM
Date Last Visited	‎06-18-2018 10:33 PM
Posts	58

User Statistics

User Activity

Assistance for stp

Static route forwarding address

Need Help

MED

NSSA

thanks for you kind response

Thanks Akash. Appreciate you

Hi Kevin, It can be possible

Agreed with Akash.You can use

Got that.... thanks Folf. So