Hello,Configuring point to point on a cisco router 1921 to fortigate firewall is technically possible right?Do I still need to do the authentication? or encapsulation ppp command should work already?Thanks.

Hello,We have a flat network, Cisco 881 router > Switch > Polycom Video Conference deviceI have successfuly statically NATed the Polycom device to public IP but then it seems that the video traffic is not going in.Ive NATed 192.168.1.50 : 115.42.184....

Hello,We are planning migrate from CUCM to CME. Our current infrastructure is 2900 Router > Cisco Media Convergense Server > Switch > PhonesCurrently CUCM is the one managing our voice infrastructure and will decommision the Cisco MCS then install th...

Hello,We have a setup of a firewall in between my Cisco 1841 router and Switch.Cisco Router --> Meraki Firewall--> SwitchClient VPN is configured on the Meraki Firewall but then for the outside users to client vpn in to the network, I have to port fo...

Hello,We have a UC540, we bought 10 analog line and about 30 DID or DDI. What we want to achieve is if for example, one DDI number call out, will it correlate to the CLI and be shown in the receiver's party mobile phone the DID number instead of the ...