About Nizam Hafiz Md Ishak

Nizam Hafiz Md Ishak · 07-11-2013

Hi Peter,Unfortunately no solution for this. I've checked with our local Cisco support here as well ...

Nizam Hafiz Md Ishak · 10-02-2012

I'm using Provisioning Extensions on X7.2, and TMS 13.2.1. and more or less have the same setup i.e:...

Nizam Hafiz Md Ishak · 09-28-2012

Hi Martin,You're exactly spot on with what I'm trying to achieve here. However I don't see how to go...

Nizam Hafiz Md Ishak · 09-27-2012

Hi Alok,MSE <> VCSC <> VCSE <> VCSE (partner)The subscribed bandwidth is 10Mbps between partner VCSE...

Nizam Hafiz Md Ishak · 09-27-2012

Hi Alok,It works in a certain way but I have no control over their bandwidth so what happened was th...

Nizam Hafiz Md Ishak · 09-27-2012

This happens to be a BUG on the TS which should be resolved in 2.3.

Nizam Hafiz Md Ishak · 09-27-2012

Hi,I'm wondering if there's a way we can limit the number of calls between two subzones, zones or VC...

Nizam Hafiz Md Ishak · 09-17-2012

Hi Tina/rf,Solved mine as well. Thanks.

Nizam Hafiz Md Ishak · 09-05-2012

Hi Tina,I'm facing the same problem with my Touch Devices on my TX9000 and TX1310-65. All my CTS 797...

Nizam Hafiz Md Ishak · 06-07-2012

I have a setup as briefly describe below where our meeting control softkey (on the 7975 phone of our...

Nizam Hafiz Md Ishak · 03-22-2012

Hi javalenc,CUC 1.x not 5.0 (my mistake, thanks for pointing this out). I've seen the FAQ and the co...

Nizam Hafiz Md Ishak · 03-22-2012

Hi all,This is my first post here and I've been looking through the support community for CUCM & CUC...

Limiting number of calls between VCS zones/subzones?