Hello All, we have Cisco ASA 5545- X NGFW with device license VPN premium. And failover license value is Active/Active. I have configured successfully active/standby firewall also replicated the configuration. but the secondary firewall state is "Fa...
Hi, I am trying to connect 4500 x to 6509 e using 10 Gb LR but it is not connecting. on 4500 ports status is not connected but on 6509 port status shows connected. I gave a loop also on 4500 it works fine. Then, I connected 2960x switch using same 10...
Hi, I have configured ARP inspection along with DHCP snooping.All the computers are getting the IPs properly and building the snooping database. but once I disable and enable the network adapter, it starts discovering for IP address, in that process ...
My access point version iscisco AIR-AP1252G-E-K9and is 802.11 g/ni am sitting very close to the access point but then also i can reach upto 22 Mbps only. I check on my andriod phone the same result.is there any configuration i have missed?? Thank You...
Hi, I would like to know, how much bandwidth a PIX firewall can handle. Actually one of our branch office is still having PIX firewall and we have a huge replication going on from head office to this branch. for temporary purpose we have upgraded the...
Yes. the optic on 6500 is X2 10 Gb LR. I switched the fiber strands didn't worked. the head scratching thing is on 6500 the interface status is "Connected" but on the 4500 it is not.I configured both the ports as trunk and changed their native VLAN, ...
Hi Bekzod, have you disabled insertion of option-82 if not then type in your switch this command:- no ip dhcp snooping information option Can you post your configuration you have done for DHCP snooping.
Hi Rolf,I have some concerns regarding DAI in our organization. i have applied DAI on all our access switches(Cisco), our DHCP server is Cisco 6509 core switch. All teh trunk ports connecting to core switch are "Trusted Interfaces with rate limit unl...
