About Jason Fraioli

Jason Fraioli · 01-23-2015

Scenario: extend multiple layer 2 vlans to multiple locations (at least 3) over IPSEC. I used L2TPv3 to accomplish this goal for a single vlan. The solution works great, but I’ve been given a new requirement to extend multiple vlans over the same p...

Jason Fraioli · 09-26-2013

Good morning,I am seeking advice regarding firewall capabilities between internal VLANs. I currently have a collapsed core architecture with a single core switch (4500 series). All internal VLAN SVIs reside on the core switch. I'm using access lis...

Jason Fraioli · 07-09-2013

The Monitor -> Dashboards -> Monitoring screen is telling me that there is no performance or availability data because there are no configured pollers. When I look at the pollers configuration, I don't have a create button, nor can I edit any of the...

Prime LMS 4.2.3 + SNMPv3 + User Tracking · 07-03-2013

Is user tracking able to function without SNMPv2? I recently implemented SNMPv3 on a couple of Cisco 3750's to test LMS functionality. Since I removed SNMPv2 from these switches, I no longer get IP and MAC address information in user tracking repor...

Jason Fraioli · 05-21-2013

I am having trouble with the SNMP v3 context configuration. I can't get SNMP v3 configured to use context prefix matching.SNMP v3 Group that works:snmp-server group v3lms v3 priv read v1default write v1default access 10snmp-server group v3lms v3 aut...

Jason Fraioli · 01-23-2015

David, this is the same problem I am currently facing. With multipoint L2TPv3, you need to provision additional interfaces, on the LAN side of the router, to create the xconnect mesh between all destinations. R1 (E0/0) ------xconnect to------ R2 Loo...

Jason Fraioli · 07-09-2013

Thanks Vinod!

Jason Fraioli · 07-03-2013

I'm not having any luck implementing the SNMP context. I'm getting the MAC and port vlan assigment in LMS, but I'm not getting the IP address.snmp-server group v3lms v3 auth read v1default write v1default access 10snmp-server group v3lms v3 priv rea...

Jason Fraioli · 04-04-2011

Stephen,Thanks for the reply.The download for LMS 3.2 fails on the download page. I can't find the 3.2 software on the Cisco download page either. Is the 3.2.1 download just a patch or can I upgrade from 3.0 to 3.2.1?

Jason Fraioli · 08-26-2010

Mr. Clarke,The help section on the Dynamic User Tracking page shows the following commands as necessary to enable the SNMP traps.mac-address-table notification interval 15Is CiscoWorks smart enough to deploy the correct commands for each IOS version ...

Member Since	‎08-31-2007 06:40 PM
Date Last Visited	‎07-18-2018 12:03 AM
Posts	219
Total Helpful Votes Received	26

User Statistics

User Activity

Multipoint L2TPv3 (LAN-to-LAN extension)

InterVLAN Firewall Options

Prime LMS 4.2.3 + No devices associated to pollers

Prime LMS 4.2.3 + SNMPv3 + User Tracking

Prime LMS 4.2.3 + Cisco View + SNMP v3 Context

David, this is the same

Prime LMS 4.2.3 + No devices associated to pollers

Re: Prime LMS 4.2.3 + SNMPv3 + User Tracking

Re: CiscoView Device Package

Re: Ciscoworks user tracking-chase mac-address