I recently swapped the certificate in use for EAP, RADIUS and Admin on our ISE deployment, signed using our internal CA. This was carried out approx 36 hours ago , application was restarted on both nodes and everything has been working fine up unti...
We experienced an outage in Azure yesterday afternoon resulting in a number of failed VMs. One of these failed VMs hosts one of our Cisco FTD appliances and although Microsoft say they have now fixed the issue this appliance is not functioning corre...
Can anybody confirm whether NBAR2 is supported on 4500X switches or not?
I am attempting to send NBAR2 info to a Solarwinds server using Flexible Netflow, Solarwinds recommend the following commands are entered into the switch:-
option application-t...
I'm struggling to find a stand out product to achieve this, seems a lot of models that Cisco aimed at this arena have recently gone end-of-life. I realise I could go down the 1900 ISR route and buy suitable HWICs but I'm not sure the budget will str...
Can somebody assist me please, I'm not able to discover any new devices in our LAN when running a discovery, either in Standard or Custom mode. Below is the recent output from csdiscovery.log but I'm not sure how to interpret it for likely solutions...
Many thanks for your guidance Mark.
Have come to the conclusion that NBAR isn't supported on the 4500X unless anybody tells me otherwise. Suspect it's only on routers. None of the software releases for this platform that I looked at had the feature...
Thanks Mark
Specifically this relates to a 4500X switch.
The nbar command is not available within int configuration mode, I wasn't aware that you needed to add it. It's looking more and more like it's not supported.
Can anybody give a definitive a...
Thanks AfrozDon't think NetConfig will do it (unless I'm missing something), the configuration changes will differ depending on the device, so there will be a large number of different jobs. Anybody got any other ideas?
Thanks for your response Vinod but unfortunately this hasn't really answered my question - I understand that the IOS generates a unique engineID which isn't displayed by default but can be viewed using a show command.The problem I have is that I need...
Thank you both for your responses - I've got quotes and to be honest neither option is that affordable, Joseph are you able to offer me any guidance on what modules / interfaces I would need to implement CWDM/DWDM? Would it be supported with my curr...
