About Dan Schauss

Dan Schauss · 08-20-2019

We have two Data Centers, East and West. The West is considered our DR site (separate, but identical Hw). If the EDC data center craters, we would like to spin up the WDC using the EDC's Master System config.Currently we are using a tool to pull th...

Dan Schauss · 07-21-2020

Here is another trick.Using the telnet to Router A and then telnet to Router B, from A example.On Router B, you can set the 'escape' character. The default being '6' for both routers.Here we are stetting the escape character on Router B to the 23rd l...

Dan Schauss · 08-20-2013

FYI I had a site to site tunnel that would not come up on Phase 1 with the following debug warning: deleting SA reason "Recevied fatal informational" stateDevice: VPN Service Module blade199.173.227.18 149.168.1.164 MM_NO_STATE 78536 A...

Dan Schauss · 07-30-2013

Changing the Gatekeeper settings worked. Here are two informative links. http://answers.uchicago.edu/page.php?id=24322Disable Gatekeeper. https://answers.uchicago.edu/page.php?id=25481dan

Dan Schauss · 07-29-2013

So was the fix applied only to 8.4 code? We're running 8.2(5)44 on a ASA 5520 and are having no luck with loading the AnyConnect client (anyconnect-macosx-i386-3.1.00495-k9.pkg) on a MAC os X 10.8. We tried saving the file and loading it manually a...

Dan Schauss · 07-22-2013

Bel, So you added both an inbound and outbound rule for udp 443 on the 'outside' firewall. Not until I added the UDP rule did the Anyconnect client connect with DTLS. You can verify how the AnyConnect user is connecting to the firewall using ASDM,...

Member Since	‎10-26-2010 09:40 AM
Date Last Visited	‎07-28-2020 08:44 AM
Posts	11
Total Helpful Votes Received	10

User Statistics

User Activity

ASA Cluster 5585 deploying the Master System config to another HW cluster group for DR

Re: Ctrl-Shift-6-X combination for telnet

deleting SA reason "Recevied fatal informational" message

Cisco AnyConnect 3.0.2 and Mac OS X 10.7

Cisco AnyConnect 3.0.2 and Mac OS X 10.7

Performance : Anyconnect vs. IPSEC