Please I have an ISR4321-B/K9 and wants to know what the B stands for, I have been to google and cisco website but no information about it, below is a link from cisco website but it is not included.Please if anyone knows what the B stands for, Pleas...
Hi Everyone,
Please I will be glad if anyone could help me with some tips on how to upload image into ap802 on the cisco 887va-w, the router is okay but when i session into AP on the unit, i get the following
ap:
I have tried flash_init after that...
Hi All,
Please I will be glade if someone can help me with the above issue,I have been on cisco website and google but no joy,I have the above unit which I want to default,it boot to cli and continue to pop up this message below
*Feb 27 11:04:15.815...
Please has anyone seeing this error on a cisco nexus 9396tx ,it passes post test but it gives the following error,what could be wrong.
CISCO SWITCH Ver7.34Device detected on 0:6:0 after 0 msecsDevice detected on 0:1:1 after 0 msecsDevice detected on ...
Hello Everyone,
I will be glad if anyone can help me with an answer to my question,I have a call-manger set up and already working but I want to have another call-manager as a standby for redundancy purpose just in case my primary call-manager fail...
I know this is an old post but I think this might be helpful to someone who might be having a similar issue with their ASA5580 with system led red and flashing.With respect to the above issue what you can also do is to reseat or remove all the memor...
Hi Leo Laohoo,
Many thanks for responding to my question, very kind of you,I will follow Raze link and it should be okay, I saw the document before but it was not too clear to me at first before I posted my question
Thanks.
Kaycee
Hi Reza,
Thanks for your time and response to my question, I saw this document on cisco website before I posted my question, I tried following it but could not locate the flash below on the AP as stated on the document
#dir flash:1:but after looking ...
Hi Cmcclinton,
Thanks for your quick response,greatly appreciated, I have decided to return the unit to the supplier ,other similar unit work with the ctrl+Break key except this particular one.
Many thanks.
Hi Julio,
Thanks for your quick response to my mail,very kind of you,I tried your instruction but it did not work but I appreciate your time and help.
I do not know if it is because of the version of the ios as I tried ctrl+break on a similar unit an...
