About pslavkovsky

pslavkovsky · 11-15-2013

HiI captured some TCP comunication because there is a issue with long respons of some application.I see in some TCP packets using Wireshark:window size value:593{Calculated window size: 151808}{Window size scaling factor: 256}Can this values indicate...

pslavkovsky · 11-15-2013

HiI captured some TCP comunication because there is a issue with long respons of some application.I see in some TCP packets using Wireshark:window size value:593{Calculated window size: 151808}{Window size scaling factor: 256}Can this values indicate...

pslavkovsky · 10-06-2013

HiI upgraded failover pair of ACE30 modules.There is this steps in UPGRADE GUIDE Step 8 Configure ACE-1 to autoboot from the latest ACE image. To set the boot variable and configuration register to1 (perform auto boot and use startup-config file), us...

pslavkovsky · 07-16-2013

Hi I captured attempt (telnet 10.197.10.19 8888) from 10.123.14.24 of connection on outside interface of ASA2 packets captured 1: 13:35:59.051358 10.123.14.24.37199 > 10.197.10.19.8888: S 920768158:920768158(0) win 49640 <mss 1380,nop,wscale 0,nop...

pslavkovsky · 02-12-2013

Hi,I have failover pair of ASA boxes without configuration of stateful failover. There is only basic LAN failover.I want to add stateful failover configuration using dedicated interface of ASA. Is this with downtime zero when I will add command for s...

pslavkovsky · 10-07-2013

acedc3-01/Admin# sh ft group briefFT Group ID: 1 My State:FSM_FT_STATE_ACTIVE Peer State:FSM_FT_STATE_STANDBY_HOT Context Name: ssl-dc3-acc Context Id: 1 Running Cfg Sync Status:Running configuration sync has c...

pslavkovsky · 07-17-2013

thank you very muchPeter

pslavkovsky · 07-17-2013

I turned off logging Build message and now I see Teardown of my attemptIt looks that there was a lot of messages and not all was send form ASA. maybe.So now I see Teardown TCP connection 687760866 for dci:10.197.10.19/8888 to inside:10.123.14.24/526...

pslavkovsky · 07-17-2013

I check level logging, I fixed it, now is OK, there is a lot of diferent Build.. and Teardown.. messages in syslog so I did attemptBut I see only Bulit... message, no Teradown of my attempt. And after attempt I immediatlly checked show connection on ...

pslavkovsky · 07-16-2013

Yes, you understand correctly.I will check level of logging.Peter

Member Since	‎07-02-2003 07:41 AM
Date Last Visited	‎09-16-2022 05:46 AM
Posts	121

User Statistics

User Activity

TCP Window size

Calculated window size

Replication of Admin context

Reset of connection

Adding stateful failover to running configuration

Replication of Admin context

Reset of connection

Reset of connection

Reset of connection

Reset of connection