Hi Rameez..   Since the purpose of https is for security which is default web access protocol for the codec we don't have configuration to disable the https and access the system using http which is unsecure. You can try using SNMP to query the cts c...

Hi Alan   Yes tx9000 can control wolf vision doc camera.1. Make sure that tx9000 device is configured and enabled for document camera in the cucm page under presentation input device.2. Connect the doc camera to the doc camera port as specfied in the...

Hi David  The DSCP values you are seeing in the sysop logs are not altered by CTS codec since it is incapable of remarking the packets, and all the markings are based on cucm settings. All that it shows in the logs are the packets those are seen on t...

Hi Manish   You can click Cisco TelePresence Room Design Guide from the below link for more details on Lighting and Accoustics details for telepresencehttp://www.cisco.com/en/US/solutions/ns669/networking_solutions_products_genericcontent0900aecd8055...

Fadal   CTS 3000 endpoints will not register using SIP URI (even though they use sip for signalling and registering with CUCM)as Cisco tandberg does in VCS, and  also its not provisioned to dial using sip uri's instead  users can only use numbers to...