About lcuevas1

lcuevas1 · 03-26-2013

First, This is a new installation. All the SPA504G are working ok, I only have some problems with CIPC.All IP Phones are registering ok, and the voice quality is perfect.Sometimes my CIPC freezes when I try to make a call, do not respond the dialing ...

lcuevas1 · 09-28-2012

Hi guys, I have an ASA5510-BUN-K9 in this version:###Cisco Adaptive Security Appliance Software Version 8.0(3)6 Device Manager Version 6.0(2) Compiled on Thu 17-Jan-08 17:42 by buildersSystem image file is "disk0:/asa803-6-k8.bin"Hardware: ASA5510,...

lcuevas1 · 03-28-2012

SOLVEDI recently configured a CPTONE modified for analog lines connected to CANTV through FXO interfaces. The solution has proved successful disconnect supervision for incoming calls to the router's FXO ports on a Cisco ISR2911-V.STEP 1voice class cu...

lcuevas1 · 01-26-2012

Do i need upgrade CUCM to install an 7925G in an CUCM 6.0.1 version?

lcuevas1 · 10-10-2011

can I install a telepresence system in an office with a UC560 or simply not use any call agent in the implementation of a telepresence system 1300?

lcuevas1 · 09-28-2012

Thanks Varun, Best Regards

lcuevas1 · 10-10-2011

Thanks Jonathan, this is for a branch office in other country , could i connect the new CTS1300 at that branch office trough VPN to the Main Office's CUCM for this solution?

lcuevas1 · 05-24-2011

Thanks Rob and Amer for your help,but anyone could tell me where in cisco pages I could find this statement? "that with SRST we dont need purchase phone device license in a CUCMBE based solution"

lcuevas1 · 02-08-2011

Please check the ASA logs and lookup for any deny UDP or Multicast packets coming from the CUCM or IP Phones over the test.

lcuevas1 · 12-15-2010

To capture, bring up the first FTP client session, then try to telnet from outside to port 21 on that server at the same time from the same machine, repeat after that from some other machine. I recommend you check Dynamic NAT table too.

Member Since	‎10-14-2010 09:12 AM
Date Last Visited	‎05-02-2018 12:45 AM
Posts	20

User Statistics

User Activity

CIPC freezes with UC540

Adding Content Security to an ASA5510-BUN-K9 Firewall Edition

Supervision FXO Disconnect Problem Solution for CANTV Venezuela

Do i need upgrade CUCM to install an 7925G in an CUCM 6.0.1 version?

Do i need an CUCM for the implementation of a Telepresence 1300 system?

Adding Content Security to an ASA5510-BUN-K9 Firewall Edition

Do i need an CUCM for the implementation of a Telepresence 1300

Re: SRST and UCL licensing in CUCM Business Edition 5000

Re: One Way Audio issue over WAN ( VPN Tunnel) with CUCM 7.1(5)

Re: two active ftp session not working for ASA5510