mwinnett

Syed, as far as I can tell, yes you will need a GEO DB per device. They are not transferrable betwee...

CharlesYou need to sit down and determine what traffic you want to permit into the device. There is ...

You'll probably need to open a tac case so someone can check the css & tac configs and you'll probab...

Charles, I would do this with the interface access-list. You will need to explicitly permit the traf...

Can you clarify what you mean by "traffic restricted to ssh & https" ? Ie: do you mean only ssh & ht...

Nishchay, Probably best to open a tac case to troubleshoot the issue. It should be able to work (it ...

Looks like defect CSCtr63776 "Interface config got wiped off while configuring HTTPs kal" which was ...

The ace cannot do this as there is no fixup available. Matthew

If a real goes down (fails probe) then the csm will remove it from service and not send connections ...

I don't think you can. What about the XML interfacehttp://www.cisco.com/en/US/docs/interfaces_module...

No.

Joel, I checked internally and only located one case raised against ACE and Exchange 2013. The issue...

Do you still have this issue ? Would it be possible to share the logs or open a tac case ? Matthew

Can you drop me a mail offline with your phone number and time zone (mwinnett@cisco.com). Matthew

William, Is the IBM5822 also doing dlsw ? My assumption is that it has a dlsw peer to the 2600 and i...